Table of Contents
Advertisement
Electrical Requirements
Motor No Load Speed
Blade Diameter
Arbor Size
Cutting Capacity
When unpacking, check to make sure that the item is intact and undamaged. If
any parts are missing or broken, please call Harbor Freight Tools at the number shown
on the cover of this manual as soon as possible.
read the entire iMpOrtant SaFetY inFOrMatiOn section at the
beginning of this manual including all text under subheadings therein
before set up or use of this product.
warning
warning
note: For additional information regarding the parts listed in the following pages, refer
to the Assembly Diagram near the end of this manual.
1.
If the Saw has been in use, allow the Blade to cool down before changing the
Blade. Blades can become very hot when cutting.
2.
Remove the Hole Cover (39) and use the mm Hex Wrench to remove the Nut
(3).
3.
Slide the Bolt (42) out and remove the Blade Guard (37) from the unit.
SKU 97200
For technical questions, please call 1-800-444-3353.
SpeCiFiCatiOnS
unpaCKing
list of contents
description
Mini Circular Saw
Saw Blade
Hex Wrench
Set up inStruCtiOnS
risk of accidental starting; resulting in serious personal
injury. leave the power Switch of the tool "OFF" and unplug
the tool from its electrical outlet before assembling or
making any adjustments to the tool.
installing the Saw Blade
120 V~ / 60 Hz
000 RPM
2"
7/1"
1/2"
Qty
1
2
2
Page 10
Advertisement
Table of Contents
