Getting Information; Updating Your Tv Via Usb/Network - Sharp LCD colour TV Operation Manual

Appendix

Getting information

Information
Picture / Audio test
When external equipment is connected with the TV
powered on and there is no audio/video output, the TV
may determine which equipment could cause a problem
between the TV and the external equipment.
Go to "HOME" > "TV Menu" > "Setup" >
"Information" > " Picture / Audio test".
NOTE
• Terminals which can be tested:
HDMI, component, composite, DVI, D-sub.
• External speakers cannot be tested. This function is available
for the TV speakers only.
Item
Perform a test for picture display. When
external equipment is connected but the
Picture test
picture is not displayed, the test will be
performed.
Perform a test for audio playback. When
external equipment is connected but the
Audio test
audio does not playback, the test will be
performed.
Information
Message list (D-TV only)
When new software is detected, you can confirm the
update information and download the software from
"Message list".
Go to "HOME" > "TV Menu" > "Setup" >
"Information" > "Message list".
NOTE
• When the TV succeeds at downloading new software, the
message is updated in the "Message list" of the "Information"
menu.
• The software update will not be carried out if there is no new
software available at the specified download time.
Information
Receiver report (D-TV only)
Display reports regarding failures and changes for timer
settings.
Go to "HOME" > "TV Menu" > "Setup" >
"Information" > "Receiver report".
Information
Identification
You can check the TV ID on the screen for reporting to
customer service.
Go to "HOME" > "TV Menu" > "Setup" >
"Information" > "Identification".
82
LC-6070UD1H_EN_book.indb 82 LC-6070UD1H_EN_book.indb 82
Description

Updating your TV via USB/Network

Information
Software update
This function allows you to update to the latest software
using a USB device or Network.
1
Go to "HOME" > "TV Menu" > "Setup" >
"Information" > "Software update" > "USB
update".
• You can also update the software through the network.
Go to "HOME" > "TV Menu" > "Setup" > "Information" >
"Software update" > "Network update" > and follow the
on-screen instruction.
• A broadband connection and Network setup are
required to update the software using the internet (Pages
50 – 52).
2
Press ENTER and then insert the USB device
containing the software update file.
CAUTION
• Be sure to insert the USB device correctly into the terminal.
3
The TV displays a confirmation screen while
checking the data in the inserted USB device.
CAUTION
• If the data is not compatible with the system, an error
message appears on the screen. Repeat steps 2 and 3 after
pressing ENTER.
• When an error message displays, check to see if:
• The USB device is inserted firmly.
• The USB memory has two or more software update files.
• No data for updating the system exists in the USB
memory.
• The software update file is broken.
• The software update file is not compatible with your TV's
software.
• The current system is same as the system update data.
• The USB memory is not formatted by FAT32.
4
The TV displays the software version information
after checking the data.
5
Press c/d to select "Yes" to update the system,
and then press ENTER.
6
The TV restarts automatically, and the software
update will be complete.
• This operation may take a while.
NOTE
• You cannot update the software using a SD/SDHC memory
card containing the update file.
1/2/2014 8:57:37 AM 1/2/2014 8:57:37 AM