IBM 8260 Installation Instructions Manual page 18

Installation Instructions
2.8 .1.1 Migration of PEER GROUP 1 - HUB a
---ATM ADDRESS SETTING ---------------------------------------------------
After having completed the swap, the ATM address has been migrated to the Node-0
ATM address, but the PNNI Summary Address was set to a default value. So you need
to enter the old ATM address again, with a new selector, by issuing the following
command :
o HUBa>set pnni node_0 atm_address:
39.99.99.99.99.99.99.00.00.77.77.01.01.00.00.82.60.01.01.01
o HUBa>SHOW FUTURE_PNNI NODE_0
Check your new ATM address.
o HUBa>COMMIT PNNI , the 8260 will be reset
The telnet session if any is broken.
Login as ADMINISTRATOR on the 8260 console.
o HUBa>SHOW PNNI NODE_0
Check your ATM address. It will display information about : LEVEL
ID, PEERGROUP ID, NODE ID.
--- PORT SETTING ----------------------------------------------------------------
AUTOMATICALLY MIGRATED.
--- VIRTUAL PATH CHANNELS SETTING (VPCS) : --------------------------------
No VPC links need to be defined
--- REACHABLE ADDRESS SETTING : -------------------------------------------
No REACHABLE ADDRESS need to be defined
2.8 .1.2 Migration of PEER GROUP 1 - HUB b
PN : 26L0227 EC : F34705 June 17 1998
Copyright IBM Corp. 1998
Page 18