Table of Contents
Advertisement
Drill
Circular Saw
Reciprocating Saw
Flashlight
Batteries
Charger
Accessories
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
WARNING: When using tools, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using any of these tools!
1.
Keep work area clean. Cluttered areas invite injuries.
2.
Observe work area conditions. Do not use machines or power tools in damp or wet
locations. Don't expose to rain. Keep work area well lighted. Do not use electrically
powered tools in the presence of flammable gases or liquids.
3.
Keep children away. Children must never be allowed in the work area. Do not let
them handle machines, tools, or extension cords.
4.
Store idle equipment. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
5.
Do not force tool. It will do the job better and more safely at the rate for which it was
intended. Do not use inappropriate attachments in an attempt to exceed the tool
capacity. Caution: Always keep guards in place.
SKU 40056
40056 combo pack.p65
2
Specifications
≅ ≅ ≅ ≅ ≅
0
550 RPM
3/8 inch keyless chuck
Variable speed Switch
Forward / Reverse Switch
6 torque settings
2400 RPM
Saw Blade Size 5-3/8"
1-1/2 inch cut depth at 90 degrees
1-1/4 inch cut depth at 45 degrees
Bevel: 50 degree
200 output watts
0-2800 SPM
Stroke: 7/8 inch
90 degree swivel head
Two 14.4 VDC batteries provided
120 VAC (input) 3 to 5 hour charging time,
1.3 amp/hour UL approved
Molded case for all items
Two reciprocating saw blades
Save This Manual
Safety Warnings and Precautions
Page 2
REV 11/02
10/10/03, 10:11 AM
Advertisement
Table of Contents
