OPERAtION
BEFORE OPERAtING YOUR APPLIANCE FOR tHE
FIRSt tIME
2. Shelves and trays
The shelves are designed so that they have maximum
travel but cannot be accidentally pulled right out . The
trays are designed the same way and fit straight into the
side racks .
• Locate the rear edge of the shelf/tray in between 2 guide
rails of the side rack - see diagram . Ensure the same rail
positions on both sides of the oven are being engaged .
WMAN_541_Jun10.indd 6
• With the front edge raised, begin to slide the shelf into the
oven .
• Once the detents have passed the front edge of the side
rack, the shelf can be pushed completely in .
• When fully inserted the shelf/tray should not interfere with
the closed oven door .
• To insert the grill tray in a separate grill underbench
(GGP475 model), fully open the grill drawer and position
the tray so that the slots on the outer edges fit on the tabs
on the slides .
Separate grill underbench
(GGP475)
4/6/10 10:18:30 AM