Start-Of-Run Record; Format Of Caller Data - IBM SC34-6814-04 Customization Manual

Start of task indicator
Reserved
The caller data differs depending on the CICS component issuing the record, and
on the function being journaled.

Start-of-run record

When CICS connects to a general log, it writes a start-of-run record to it as the first
record for this run of CICS. This record comprises a record header (with the same
format as that for any general log journal record) followed by a start-of-run body.
The format of the start-of-run record is shown in Figure 76.
CICS release
SOR_CICS_RELEASE
CICS applid
SOR_SPECIFIC_APPLID
Figure 76. Format of the start-of-run record
SOR_CICS_RELEASE
SOR_SPECIFIC_APPLID
SOR_CICS_USERNAME
For a start-of-run record, CICS puts the domain identifier "LG" (for "logger") in the
GLRH_REC_COMPID field of the record header.

Format of caller data

Caller data follows the record header.
The format of the caller data part of a general log journal record differs according to
the CICS component writing the record, and the function being journaled.
716
Customization Guide
1-byte which may contain:
X'8n' Equivalent to JCSPSOTK (start of task)
X'4n' Equivalent to JCSPLSTK (start of UOW)
3-byte reserved field.
Fixed length
4 8
SOR_CICS_USERNAME
4-byte CICS release.
8-byte CICS applid.
8-byte CICS username.
8
CICS username