Terminal Not Known' Condition Exits Xaltenf And Xictenf - IBM SC34-6814-04 Customization Manual

XPI calls
Exit XTCATT
When invoked
Exit-specific parameters
Return codes
XPI calls

'Terminal not known' condition exits XALTENF and XICTENF

The 'terminal not known' condition can occur when intercommunicating CICS
regions use both SHIPPABLE terminal definitions and automatic transaction
initiation (ATI). The condition is especially likely to arise if autoinstall is used.
SHIPPABLE attribute
Automatic transaction initiation (ATI)
224
Customization Guide
All can be used. However, note that you cannot use a GETMAIN call to
obtain terminal-class storage for use as a replacement TIOA.
Before task attach.
UEPTCTTE
Address of the terminal control table terminal entry (TCTTE). The
TCTTE can be mapped using the DSECT DFHTCTTE.
UEPTIOA
Address of the terminal input/output area (TIOA). The TIOA can be
mapped using the DSECT DFHTIOA. However, fields TIOASAL and
TIOASCA are not programming interfaces.
UEPTCTLE
Address of the terminal control table line entry (TCTLE). The
TCTLE can be mapped using the DSECT DFHTCTLE.
UEPTRAN
Address of the 4-byte transaction id.
UERCNORM
Continue processing.
All can be used.
Terminals defined with the SHIPPABLE attribute in a terminal-owning region
(TOR) do not need a definition in a connected application-owning region (AOR).
If necessary to support transaction routing, CICS ships a copy of the definition
from the TOR to the AOR. For further information, refer to the CICS
Intercommunication Guide.
ATI occurs when an internally generated request leads to the initiation of a
transaction. For example, when:
v An application issues an EXEC CICS START command, or
v The transient data trigger level is reached.
Two CICS modules handle ATI requests:
The interval control program processes a START command, checks that the
terminal is known in the local system, and (when any START time interval
elapses) calls the terminal allocation program.
The terminal allocation program is called by the interval control program or by
the transient data triggering mechanism, and checks that the terminal is known