Temporary Storage Domain Exits Xtsqrin, Xtsqrout, Xtsptin, And Xtsptout - IBM SC34-6814-04 Customization Manual

XPI calls
Temporary storage domain exits XTSQRIN, XTSQROUT, XTSPTIN, and
XTSPTOUT
The temporary storage domain exits XTSQRIN, XTSQROUT, XTSPTIN, and
XTSPTOUT allow you to:
v Specify, for a request that creates a queue, whether the queue is to be held in
v Monitor the use of temporary storage
v Control security for temporary storage queues.
The temporary storage domain has two main gates, TSQR, and TSPT, which
support the following functions:
TSQR Write, Rewrite, Read_into, Read_set, Read_next_into, Read_next_set,
TSPT Put, Put_replace, Get, Get_set, Get_release, Get_release_set, Release.
The TSQR functions correspond to those available through the EXEC CICS
interface (or through DFHTS TYPE=PUTQ, GETQ, or PURGE). The TSPT functions
are used by the interval control program in support of START and RETRIEVE
functions (or DFHTS TYPE=PUT, GET, or RELEASE).
Exit XTSQRIN
When invoked
Exit-specific parameters
All other XPI calls except WRITE_JOURNAL_DATA can be used. However,
their use is not recommended, because they could cause the task to lose
control, thus allowing another task to write more monitoring data.
main or auxiliary storage, and its recoverability
Delete.
Before execution of a user temporary storage interface request for a user
TS queue (for example, a WRITEQ TS, or READQ TS request).
UEPTRANID
Address of the 4-byte transaction ID.
UEPUSER
Address of the 8-byte user ID.
UEPTERM
Address of the 4-byte terminal ID.
UEPPROG
Address of the 8-byte application program name.
UEP_TS_FUNCTION
Address of a byte containing the function:
v UEP_TS_FUN_WRITE
v UEP_TS_FUN_REWRITE
v UEP_TS_FUN_READ_INTO
v UEP_TS_FUN_READ_SET
v UEP_TS_FUN_READ_NEXT_INTO
v UEP_TS_FUN_READ_NEXT_SET
v UEP_TS_FUN_DELETE
Chapter 1. Global user exit programs
207