Create Customized Configuration Diskette; Delete Resource From Resource List; Disk Maintenance - IBM 6.00E+04 User Manual

Create Customized Configuration Diskette

This selection invokes the Diagnostic Package Utility Service Aid, which allows the user
to create a standalone diagnostic package configuration diskette.
The Standalone Diagnostic Package Configuration Diskette allows the following to be
changed from the console:
v Default refresh rate for a low function terminal (LFT)
The refresh rate used by the standalone diagnostic package is 60 Hz. If the display's
refresh rate is 77 Hz, set the refresh rate to 77.
v Different async terminal console
You can create a console configuration file that allows a terminal attached to any
RS232 or RS422 adapter to be selected as a console device. The default device is
an RS232 TTY device attached to the first standard serial port (S1).

Delete Resource from Resource List

Use this task to delete resources from the resource list.
Note: Only resources that were previously detected by the diagnostics and have not

Disk Maintenance

This service aid provides the following options for the fixed-disk maintenance:
v Disk to Disk Copy
v Display/Alter Sector
118
pSeries 630 Model 6C4 and Model 6E4 User's Guide
been deleted from the Diagnostic Test List are listed. If no resources are
available to be deleted, then none are listed.