Create Customized Configuration Diskette; Delete Resource From Resource List - IBM Enterprise Server S80 User Manual

Create Customized Configuration Diskette

This selection invokes the Diagnostic Package Utility Service Aid which allows the user
to perform the following action:
v Create a Standalone Diagnostic Package Configuration Diskette
The Standalone Diagnostic Package Configuration Diskette allows the following to be
changed from the console:
– Default refresh rate for a LFT
The refresh rate used by the standalone diagnostic package is 60Hz. If the
display's refresh rate is 77Hz, then set the refresh rate to 77.
– Different async terminal console
A console configuration file that allows a terminal attached to any RS232 or
RS422 adapter to be selected as a console device can be created using this
service aid. The default device is a RS232 TTY attached to the first standard
serial port (S1).

Delete Resource from Resource List

Use this task to delete resources from the resource list.
Note: Only resources that were previously detected by the diagnostics and have not
been deleted from the Diagnostic Test List are listed. If no resources are
available to be deleted, then none are listed.
Chapter 6. Introduction to Tasks and Service Aids
151