NordicTrack C 2500 User Manual page 16

HOW TO USE THE MANUAL MODE
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page
15.
2. Personalize console settings if desired.
See HOW TO PERSONALIZE CONSOLE SET-
TINGS on page 15.
3. Select the manual mode.
Each time you insert the key, the manual mode will
be selected. If you have selected a workout, press
any of the workout buttons repeatedly until only
zeros appear in the display.
4. Start the walking belt and adjust the speed.
To start the walking belt, press the Start button, the
Speed increase button, or one of the speed but-
tons number 2 to 20. Note: After you press the but-
tons, it may take a moment for the walking belt to
reach the selected speed setting.
If you press the Start button or the Speed increase
button, the walking belt will begin to move at 2
KM/H. As you exercise, change the speed of the
walking belt as desired by pressing the Speed in-
crease and decrease buttons. Each time you press
a button, the speed setting will change by 0.1
KM/H; if you hold down a button, the speed setting
will change in increments of 0.5 KM/H. If you press
one of the twelve numbered speed buttons, the
speed of the walking belt will gradually adjust until
it reaches the selected speed setting.
To stop the walking belt, press the Stop button. To
restart the walking belt, press the Start button, the
Speed increase button, or one of the numbered
Speed buttons.
5. Change the incline of the treadmill as desired.
To change the incline of the treadmill, press the
Incline increase or decrease buttons, or one of the
incline buttons numbered 0 to 12. Each time you
press a button, the incline will gradually adjust until
it reaches the selected incline setting.
6. Follow your progress with the display.
The console offers several display options. The dis-
play option you select will determine which workout
information is shown. Press the Display button re-
peatedly to select the desired display option.
As you walk or run on the treadmill, the display can
show the following workout information:
• The elapsed time.
• The distance that you have walked or run.
• The approximate number of calories you have
burned.
• The speed of the walking belt.
• The incline level of the treadmill.
• Your pace in minutes per mile or minutes per kilo-
meter.
• Your heart
rate. Note:
Your heart
rate can be
displayed
only while
you use the handgrip pulse sensor or the chest
pulse sensor. If you wish to see your heart rate for
more than 40 seconds, select the display option
shown above.
16