IBM IntelliStation Z Pro 6221 Installation Manual page 48

10. Insert the DIMM into the connector. Firmly press the DIMM straight down into
11. If you have other options to install or remove, do so now; otherwise rotate the
28
IBM IntelliStation Z Pro Type 6221: Installation Guide
the connector by applying pressure on both ends of the DIMM simultaneously.
The retaining clips snap into the locked position when the DIMM is firmly
seated in the connector. If there is a gap between the DIMM and the retaining
clips, the DIMM has not been correctly installed. Open the retaining clips,
remove the DIMM, then reinsert it.
cage back into the computer, replace the support bracket (see "Removing and
installing the support bracket" on page 15), and go to "Completing the
installation" on page 32.
DIMM 1
DIMM 2
DIMM 3
DIMM 4