IBM INFOPRINT 1116 User Reference page 99

Part 2: Creating a Network Port
1
Click Start
2
Select the printer you just created.
3
Click File
4
Click Ports, and then Add Port.
5
Click Network Port, and then New Port.
6
Enter the information to create the port.
a
b
c
d
7
Print a test page to verify printer installation. If the Printer Properties window is still open, click
Print Test Page on the General tab.
If you have closed the Printer Properties, do the following:
a
b
c
When a test page prints successfully, printer setup is complete.
Part 3: Sharing the printer on the network
1
Click Start
2
Select the printer you just created.
3
Click File
4
Check Shared, and then type a name in Shared Name text box.
5
In the Alternate Drivers section, select the operating systems of all the network clients that will
print to the printer.
Argecy Computer Corporation 248-324-1800
Settings Printers.
Properties.
Assign a logical port name. This can be any name that reminds you of the printer such as
"Printer_lab4". This name eventually appears in the list of available ports.
Select the IP address of your printer from the list. If the address is not listed, then click
Enter TCP/IP address or Name of Print Server, and then type the address in the IP
address text box.
If you don't know the IP address, press the operator panel button to print a network setup
page and look under the TCP/IP heading.
Check the option to Set this protocol to be the default protocol.
Click OK. The new port is assigned to the printer.
Click Start Settings
Click File Properties.
On the General tab, click Print Test Page.
Settings Printers.
Sharing.
Printers.
95