IBM INFOPRINT 1116 User Reference page 50

A jam may occur if the output bin is too full and the media is unable to exit the printer:
1
Empty the media from the output bin.
2
Clear the jam.
If a jam occurs while printing labels from tray 1 or the manual feed:
1
Be sure the labels remain attached to the backing sheet after clearing the jam.
2
Before resuming label printing, load paper in tray 1.
3
Press the operator panel button and print 10 or more menu settings pages.
The paper removes any remaining adhesive in or on the fuser.
If the jam occurs as the paper exits the optional tray 2 into the printer:
1
Open the printer cover.
2
Remove the print cartridge (the cartridge may be warm).
3
Gently pull the paper toward you.
4
Reinstall the print cartridge.
5
Close the printer cover to resume printing.
If you cannot reach the paper easily:
1
Turn off the printer.
Argecy Computer Corporation 248-324-1800
Note: Serious damage to your printer may occur if adhesive labels remain in the fuser.
Call the place where you bought your printer.
Note: You will lose the rest of the print job.
46