System Set-Up; Before Reading About System Set-Up - Kenwood TK-790 Service Manual

TK-790/ ( B

Before Reading About System Set-up

The TK-790(B)/H(B) is a transceiver main unit (without a
panel or speaker) that you complete by adding options.
The options are classified into three types according to
operation and function.
1. Install the front panel kit (controller) directly on a radio to
operate it. (Form : Radio + KCH-10/11)
2. Remotely control one radio with one controller. (Form
: Radio + KRK-5 + KCH-10/11 + KCT-22M/M2/M3)
Merchandise received
License and frequency allocated by FCC
Choose the type of transceiver
TK-790/(B), TK-790H(B) (Radio 1)
TK-790(B) or TK-790H(B) is complete by combining
options with only the transceiver body (without panel)
TK-790 : Contain (KCH-10)
Are you using the remote kit?
NO
See
page 16 See page 16
KCH-10 (Basic model) KCH-11 (Full featured
Front panel kit model) Front panel kit
Are you using the printed keytops?
YES
See page 16
Supplied accessory knob
4
) /H ( B )

SYSTEM SET-UP

Frequency range
148~174MHz
136~156MHz
148~174MHz
YES
Are you using one radio with two controllers?
*See Remote
kit service
manual
Are you using one radio
with one controller?
KRK-5
Single control head kit
NO
KCH-10
Are you using the voice scrambler?
NO
Transceiver programming (option)
Are you using the external speaker?
NO
KCT-23 (DC cable)
Are you using the ignition sense cable?
NO
Delivery
3. Remotely control one radio with two controllers. (Form
: Radio + KRK-6DH + KCH-10/11 (two) + KCT-22M/M2/
M3 (two))
4. Remotely control two radios with one controller. (Form
: Radios (two) + KRK-7DB + KCH-10/11 + KCT-22M/M2/
M3)
5. Remotely control two radios with two controllers. (Form
: Radio (two) + KRK-8DBH + KCH-10/11 (two) + KCT-
22M/M2/M3 (two))
RF power Type
45W TK-790/(B) F1
45W TK-790(B) F2
110W
TK-790H(B) F1
Are you using two radios with two controllers?
Are you using two radios with one controller?
YES
YES
KRK-6DH
Dual control head kit
or or or
KCH-11
KCH-10 KCH-10 KCH-11
+ +
KCH-10 KCH-11 KCH-11
*See Remote kit
KCT-22M/M2/M3
service manual
Control cable
See page 17
YES
Modified of control unit
See page 13
A personal computer (IBM PC or compatible), programming interface (KPG-43),
and programming software (KPG-44D) are required for programming.
(The frequency and signalling data are programmed for the transceiver.)
YES
See page 18
KES-4 (EXT. SP)
See Installation manual
KCT-23 M,M3 : TK-790/(B), KCT-23 M2,M4 : TK-790H(B)
YES
See page 18
KCT-18
YES
KRK-7DB
Dual band remote kit
Dual band dual control head kit
or
KCH-10 KCH-11
KCH-10
+ +
KCH-10
*Service manual parts No. list
Model
KRK-5/6DH
KRK-7DB/8DBH
YES
KRK-8DBH
or or
KCH-10 KCH-11
+ +
KCH-11 KCH-11
Parts No.
B51-8445-00
B51-8452-00