ASSEMBLY INSTRUCTIONS
NOTE:
Be careful not to damage the wires when attaching the METER(30) and the HANDLEBAR(10) to
the UPRIGHT(11).
STEP 13
Install two AAA batteries into the METER(30), the batteries are not included. See page 20 for detailed battery
installation instructions. Plug the CONNECTION WIRE(33) and PULSE CONNECTION WIRES(34) into the
METER(30), and push the excess wires back into the UPRIGHT(11). Place the METER(30) on the plate
on the UPRIGHT(11) and secure with ROUND HEAD SCREWS(M5x0.8x10mm)(53).
STEP 14
Plug the PULSE SENSOR WIRES(85) into the PULSE CONNECTION WIRES(34), and push the excess
wires back into the UPRIGHT(11). Attach the HANDLEBAR(10) to the UPRIGHT(11) with BUTTON HEAD
BOLTS(M8x1.25x20mm)(49), BUTTON HEAD BOLT(M8x1.25x56mm)(46), LOCK WASHERS(M8)(65),
ARC WASHERS(M8)(58), WASHER(M8)(61), and NYLOCK NUT(M8x1.25)(67).
12
Meijer.com