Display List - QMS 1725 SLS User Manual

The K Mem Emul Tmp is the number of kilobytes of RAM to be used
by non-PostScript emulations for storing downloaded (soft) fonts,
forms, or macros.
Menu Administration/Memory/K Mem Emul Tmp
Choices 00256-99999
Default Variable
Notes This value must be greater than the sum of the Min K Spool for
all installed and enabled interfaces.
disappears when the printer is turned off.
This client is listed as Temporary on the status page.
Increasing this client's size increases the number of PCL
downloaded fonts which can be accepted.
If you change the K Mem Emul Tmp value, the printer
automatically restarts after you save your changes and exit
from the Configuration menu.
The K Mem Display is the number of kilobytes of RAM dedicated to
the display lists. The display list holds the intermediate representation
of pages to be printed. Increasing the size of the Display List
increases the number of pages that can be collated. The maximum
number of pages that can be collated is 100 pages.
Menu Administration/Memory/K Mem Display
Choices 00128-99999
Default Variable
Notes If you change the K Mem Display value, the printer
automatically restarts after you save your changes and exit
from the configuration menu.
Data in this client