Devices To The Connections Av/Avs - Loewe Connect ID 46 Operating Instructions Manual

Connect ID 32-46
Operating instructions
External devices

Devices to the connections AV/AVS

An additional appliance such as a DVD player, VCR/DVD recorder etc. can
be connected to the TV set at the Euro-AV socket AV (see page 11).
The AV input AVS (see page 11) offers the possibility of connecting
a digital camera or a Camcorder for example.
The AV sockets can process different signal types. Which signal type
your accessory device provides can be found in the operating manual
of the appropriate device.
Owing to the large number of AV devices available on the market,
we can only mention a few examples for the connection of accessory
equipment to the AV sockets here.
If the sound of the device connected to an AV socket is to be transmit-
ted digitally, a cinch cable must be plugged between the coaxial digital
output of the accessory equipment and the AUDIO DIGITAL IN socket
of the TV set. In addition, the digital audio input must be assigned to
the appropriate AV socket.
The digital audio input can be assigned to the appropriate AV socket by
the TV menu Connections
(see page 125).
Remote TV switch on via Digital Link
You can select whether the TV set is to switch on automatically from
Standby mode if a disc is played or a screen menu displayed on a Digital
Link Plus-enabled device connected to AV.
You can find the settings in the TV Menu under Connections
Remote TV switch on via Digital Link (see also page 113).
Miscellaneous Assign digital audio input
- 114 -
Connecting a DVD player to the TV set
➠ A DVD player has been selected in the TV Menu under Connec-
tions AV connecting settings
page 112).
Switch off all equipment before connecting.
Connect the Euro-AV output of the DVD player to the AV socket of
the TV set.
Use a fully equipped Euro-AV cable (available from your dealer) for this.
DVD player
AV
Other
Playback from AV device
If the device at AV supports the Digital Link Plus functionality or if in the
TV menu Connections
voltage at AV yes, the TV set will automatically switch to the corre-
sponding AV input after starting the replay at the AV device.
The AV input can also be called manually, however.
Call AV selection.
OK switch over.
Start playback on the connected device.
Device at connection AV (see also
Connection example of a DVD player
AV connecting settings
AV SELECTION
HDMI3
HDMI2
HDMI1
PC IN
AVS
AV
VIDEO
Switch to ...
OK
Select AV,
TV set
AV
Allow switching