Hardware Considerations - IBM 2179 Hardware Maintenance Manual

v Operating system to BIOS to hardware
v Applications to operating system to BIOS to hardware
v Applications to BIOS to hardware
v Applications to hardware

Hardware considerations

Use the following tools to help identify and resolve hardware-related problems.
v Power-on self-test (POST)
v POST Beep codes
v Test programs
v Error messages
POST does the following operations.
v Checks some basic system board operations
v Checks the memory operation
v Starts the video operation
v Verifies that the diskette drive is working
v Verifies that the hard disk drive is working
Use the test programs that come with this HMM or with the system you are
servicing to test the IBM components of the system and some external devices.
Also, from the DOS prompt or from OS/2 Utilities, use the CHKDSK command to
check and repair hard disk data allocation errors.
Error messages generated by the software (the operating system or application
programs), generally are text messages. However, error messages can be text,
numeric, or both text and numeric.
Any time there is an error message indicating a problem with the system, follow
the General Checkout procedures in this HMM to resolve the problem.
Basically, there are five types of error messages.
v POST error messages are displayed when the POST finds problems with the
v POST Beep codes are sounds emitted from the speaker if the POST finds a
v Diagnostic error messages are displayed when a test program finds a problem
v Software-generated error messages are displayed if a problem or conflict is
108
Hardware Maintenance Manual
This is the recommended way. It's the most flexible because it is independent of
the hardware.
This method is inflexible and is dependent on the operating system.
This method has some flexibility but it is dependent on the BIOS.
This method is dependent on the hardware and is very inflexible. However, it is
very fast, very efficient, and it has no overhead.
hardware or detects a change in the hardware configuration.
problem. One beep indicates that the POST completed successfully. Multiple
beeps indicate a problem was found.
with a hardware component.
found by an application program, the operating system, or both. For an
explanation of these messages, refer to the information supplied with the
installed software package. Also, refer to "Software considerations" on page 107.