Setting The Clock; Detaching The Front Panel; Attaching The Front Panel - Sony CDX-GT330 Operating Instructions Manual

Setting the clock
The clock uses a 12-hour digital indication.
1
Press and hold the select button.
The setup display appears.
2
Press the select button repeatedly
until "CLOCK-ADJ" appears.
3
Press
(SEEK)
+.
The hour indication flashes.
4
Rotate the control dial to set the hour
and minute.
To move the digital indication, press
(SEEK)
-/+.
5
After setting the minute, press the
select button.
The setup is complete and the clock starts.
To display the clock, press
(DSPL).
Press
(DSPL)
again to return to the previous display.
Detaching the front panel
You can detach the front panel of this unit to
prevent theft.
Caution alarm
If you tum the ignition switch to the OFF
position without detaching the front panel, the
caution alarm will sound for a few seconds.
The alarm will only sound if the built-in
amplifier is used.
1
Press
(OFF).
The unit is turned off.
2
Press ~,then pull it off towards you.
Notes
• Do not drop
or
put excessive pressure on the front
panel and display window.
• Do not subject the front panel to heat!high
temperature
or
moisture. Avoid leaving it in
a
parked
car or on
a
dashboardlrear tray.
Attaching the front panel
Engage part
@
of the front panel with part
®
of
the unit, as illustrated, and push the left side into
position until it clicks.
Note
Do not put anything on the inner surface of the front
panel.
-
5