Epson EH-TW9100W User Manual page 90

Troubleshooting
Interference or distortion appear in WirelessHD images
Check
Are signals being received within the Wire-
lessHD transmission range?
Are there any obstructions between the Wire-
lessHD Transmitter and the projector?
Is the reception too low?
Check the range within which the WirelessHD's transceiver can
communicate, and view within that range.
Because WirelessHD communicates using a tight beamed elec-
tromagnetic wave, if there are any people or objects and so on
obstructing the communication path, this could have an adverse
affect on the image. Make sure that there are no obstacles be-
tween the WirelessHD Transmitter and the projector within the
WirelessHD transmission range.
If the transmissions are not strong enough, communication may
be unstable.
Check Reception as you set up the transmitter as it is sometimes
possible to improve the strength of the transmission by moving
the WirelessHD Transmitter or changing its direction.
tings - WirelessHD - Reception
Transmission strength may differ depending on the surround-
ings, or they may be unstable. While checking Reception, setup
the transmitter in a location where the number displayed re-
mains steady. Settings - WirelessHD - Reception
s
89
Remedy
p.58
s
p.58
s
p.73
Set-
s
p.73