Setting Auto Iris; Frame Interpolation - Epson EH-TW9100W User Manual

Adjusting the Image

Setting Auto Iris

By automatically setting the luminance according to the brightness of the displayed image, it lets you enjoy
deep and rich images.
You can select the luminance adjustment tracking for changes in brightness in the displayed image from
Normal to High Speed.
(Depending on the image, you may hear the auto iris operating, but this is not a malfunction.)
a
Press the
c
You can make settings from the
configuration menu.
Auto Iris

Frame Interpolation

This setting compares the current and previous frames, and then creates a frame between them to reduce
fuzziness and produce clearer images.
You can select the level of interpolation from Low, Normal, or High. If you notice any distortion and so on
after changing the setting, set it to Off.
a
Press the
c
You can make settings from the
configuration menu.
Frame Interpolation
button.
Image -
s
p.68
button.
Signal -
s
p.70
b
Use the
select the item, and then press the
button to confirm the selection.
b
Use the
select the item, and then press the
button to confirm the selection.
39
buttons to
buttons to