Useful Functions
Switching the source
a
Point the remote control at the
WirelessHD Transmitter, and then
press the
Remote control
Displays the sub-screen for the connected
device.
b
The target screen changes each time
you press the
c
After selecting the target screen,
please wait for a moment.
The projected image is switched.
button.
WirelessHD Trans-
mitter
button.
Displaying as a sub-screen
a
Point the remote control at the
WirelessHD Transmitter, and then
press the
Displays the sub-screen for the connected
device.
b
When switching between the sub-
screen and the main screen, hold
down the
approximately 3 seconds) until the
screen changes.
c
To close the sub-screen, press the
button again.
The projected image is switched.
c
•
When the sub-screen is displayed, press
the
for the sub-screen.
•
When the sub-screen is displayed, press
the
position and size (large/small) of the
sub-screen. Each time the
button is pressed, the display position
moves from bottom right, top right, top
left, and bottom left allowing you to
change the size.
61
button.
button (for
button to switch the image
button to change the