Check Your Installation And Close The Case; Check Motherboard Boot Sequence; Figure 3. Parallel Ata Drive With Serial Ata Converter In - 3Ware Escalade 7000 Series Installation Manual

3ware Escalade ATA RAID Controller Installation Guide
CBL-P-SATA (Parallel to Serial Converter)
Figure 3. Parallel ATA Drive with Serial ATA
Converter Installed

Check your installation and close the case

1 After all of the drives are connected to the ATA RAID Controller
and it is installed in its slot, verify that the cables do not interfere
with the operation of any other components in the case or block
the flow of cooling air.
2 Close the case and reconnect the power cables.

Check motherboard boot sequence

Using your computer's Setup utility, ensure that your boot device
precedes the Escalade ATA RAID Controller in the boot sequence.
If you have other disks installed on the motherboard, the ATA
RAID Controller precedes them in boot order.
22 www.3ware.com