Troubleshooting - Fisher & Paykel OS302 User Manual

Troubleshooting

Fault codes
If there is a fault, the oven will beep every second, and a fault code will appear in the clock
display as a letter 'F' with a number after it.
Important!
Do not turn off the main power supply to the oven if you get a fault code. The fans are
needed to cool the oven.
For safety, this oven is designed to self-cool. Turning off the power while the oven is
hot may damage the oven and its surrounding cabinetry.
If you get a fault code:
Note the fault code.
1
Turn the temperature and oven mode dials to OFF.
2
PUSH TO
Press the
3
CLEAR
enough to clear the fault.
Call your Fisher & Paykel Authorised Service Centre with the fault code information.
4
Note: If you are unable to immediately clear the fault code or contact your Fisher & Paykel
Authorised Service Centre, wait for the oven cooling fans to stop, and then press the
button again. It is likely that the oven will now clear the fault. If it does not, then you
may turn the oven off at the wall once the fans have stopped and the oven has completely
cooled down.
Problem
Oven does not
work
button. The oven may have already self-corrected, and this will be
Possible cause
Power supply is not
connected.
Clock is not set due to power
cut or failure.
Oven door is open.
What to do
Have a service company/electrician
check power connections, wiring and
fuses.
The clock must be set before the oven
can be used. The oven will go into
'Set Up' mode when the electricity is
restored after a power cut. The oven
mode and temperature displays will
show OFF. Both displays will be unlit and
unresponsive. The colon (:) in the clock
display will flash. See 'Setting the clock' .
The elements are disabled by the door
switch when the door is open. Make
sure the door is properly closed.
PUSH TO
CLEAR
Continued...
39