JVC KW-NX7000 Instructions Manual page 54

• The route calculated by the System is one of the
possible routes to your destination. The route is not
always the most appropriate one.
• If no-exit roads (only entering the rotary from the
roads is allowed) exist on the rotary, the no-exit
roads can neither be shown in the route guidance on
the display nor counted in the route guidance voice
message.
• The following phenomena may occur even if the
System is working correctly...
- It may guide to aclosed road or to aroute
requiring U-turn.
- It may not guide to your destination if there
is only anarrow road or no road to your
destination.
- It may not avoid acongestion even if
<Bypass
Traffic> is set to <Auto>.
- It may show adifferent road name.
- It may not ask you to turn at ajunction even if
you need to.
- It may give gUidance different from the actual
road conditions.
- It may give incorrect distance information.
II
Vehicle information
• The following items are displayed in
<. .
(Function
Menu» - <Vehicle Info> - <Drive>.
(1&
page 49)
@
• The data shown on the screen are approximate
values for reference.
54
OJ
Direction of the car
[1] Current speed
W
Maximum speed*
W
Average speed*
[[I
Distance you have traveled*
[[] The street you are now on
[l]
The city you are now in
[[] Latitude and longitude of your current position
[]] Altitude of your current position
[Q]
Date/Local time
* Press [Reset] to dear the record.
• The following items are displayed in
<. .
(Function
Menu» - <Vehicle Info> -
<System>.
(1&
page 49)
[TI]
Name of the unit
[Jl]
Version of the software
IT]
Version of the map database
[1] Version of the voice guidance database
[1] Connection status of the ILLUMINAnON
CONTROL lead
<On>:
The illumination signal is detected.
[ill
Connection status of the PARKING BRAKE lead
<On>:
The parking brake is engaged.
ITZI
Connection status of the REVERSE GEAR
SIGNAL lead
<On>:
Reverse gear signal is detected.
[lID Number of the GPS satellites being utilized/
Number of all the available GPS satellites