JVC KW-NX7000 Instructions Manual page 106

Initial:
Underlined
Selectable settings, [reference pagel
Select the initial disc menu language; Initial English
(~
also
page 118).
Select the initial audio language; Initial English
(~
also page 118).
Select the initial subtitle language or erase the subtitle (Off); Initial Off
(~also page 118).
Select the monitor type to watch awide screen picture on the external
monitor.
16:9: Select when the aspect ratio of the external monitor is 16:9.
4:31B (Letterbox)/4:3PS (Pan Scan): Select when the aspect ratio of
the external monitor is 4:3.
• Refer to the illustrations on the left to see how the pictures are
shown on the screen.
Select the position of the on-screen bar.
~
[76]
1:
Higher position
2: Lower position
Select playback file type when adisc/SO/USB contains different types of files.
You can store this setting separately for each source -/IDISc/SD/USB,/l
Audio: Plays back audio files.
Still Picture: Plays back JPEG files.
Video: Plays back DivX/MPEG1/MPEG2 files. (Not applicable to "50")
Audio&Video: Plays back audio files and DivX/MPEGl /MPEG2 files.
(Not applicable to "SD")
This unit has its own Registration Code. Once you have played back a
file with which the Registration Code recorded, this unit's Registration
Code is overwritten for copyright protection.
Off: Cancels.
On: Activates artwork display. To display artwork, press DISP
repeatedly.
~
[10]
• Refer also to page 116.
Select the signal format emitted through the DIGITAL OUT (optical)
terminal.
(~also
page 117)
PCM : Select this when connecting an amplifier or adecoder
incompatible with Dolby Digital, DTS, or MPEG Audio, or when
connecting to arecording device.
Dolby D:Select this when connecting an amplifier or adecoder
compatible with Dolby Digital.
Stream:
Select this when connecting an amplifier or adecoder
compatible with Dolby Digital, DTS, or MPEG Audio.
*1
Selectable only for "D1SC I/SDI/, and "USB.I/ (Playback stops when you change the setting.)
106