Installing The Network Driver For Windows 95 - 3Com 09-0572-000 User Manual

6-2 C
HAPTER
7 At the prompt, type
adapter in an ISA slot. Type
installed the adapter in an EISA slot using the EISA
configuration utility (that is, auto-sense is enabled and the
I/O base address = EISA).
8 Click the OK button to select the 3C619C adapter.
The 3Com TokenLink III Adapter Setup selection box appears.
9 Click the Continue button to use the burned-in adapter
address.
If you want to set a locally administered address (LAA), type the
12-digit LAA in the selection box (valid range = 400000000000h
to 7FFFFFFFFFFFh) and click the Continue button.
10 Click the OK button.
A prompt appears, asking if you want to restart your computer.
11 Remove the TokenDisk diskette and click Restart now.
This completes the installation of the 3Com NDIS 3.0 driver
for Windows NT.

Installing the Network Driver for Windows 95

The TokenDisk diskette includes the NDIS 3.0 driver (\WIN95).
This procedure assumes you are already running Windows 95.
Follow these instructions to install the 3Com NDIS 3.0 driver for
Windows 95.
1 From the Windows 95 desktop, double-click on the
My Computer icon.
2 From the My Computer group, double-click the Control Panel
icon.
3 From the Control Panel group, double-click the Network icon.
4 From the Network dialog box, click Add.
6: I N
NSTALLING THE
D
ETWORK RIVER FOR
A:\WINNT351\ISA
A:\WINNT351\EISA
W
INDOWS
if you installed the
if you