Resetting To Factory Settings; Service Requirements - BMW 328i xDrive Owner's Manual

1. Switch on the ignition, refer to page 47.
2. Lightly push button 1 in the turn indicator
lever up or down repeatedly until the sym-
bol appears in the display accompanied by
the word "SET".
3. Press button 2.
Use button 1 to select desired format or
4.
desired unit of measure, e.g. for fuel con-
sumption.
> Fuel consumption: mpg, km/l,
l/100km
> Distance covered: mls, km
> Time: 12h, 24h mode
> Date: day.month dd.mm,
month/day mm/dd
> Temperature: 7, 6
5. Press button 2.
6. Use button 1 to make the setting.
7. Press button 2.
The setting is stored for the remote control
currently in use.

Resetting to factory settings

You can reset the settings for formats and units
of measure to factory settings.
66
Online Edition for Part no. 01 41 2 602 097 - © 10/08 BMW AG
1. Lightly push button 1 in the turn indicator
lever up or down repeatedly until the sym-
bol appears in the display accompanied by
the word "SET".
Press button 2.
2.
3. Use button 1 to select "RESET".
4. Press button 2 until
The settings are reset.
The setting is stored for the remote control
currently in use.

Service requirements

The remaining driving distance and the date of
the next scheduled service are displayed briefly
immediately after you start the engine or switch
on the ignition.
is displayed.