Settings And Information; Formats And Units Of Measure - BMW 328i xDrive Owner's Manual

Settings and information

Operating principle
Certain settings and information can only be
called up when the ignition is switched on. A
number of settings cannot be made while driv-
ing.
1 Button for:
> Selecting display
> Setting values
2 Button for:
>
Confirming selected display or set val-
ues
> Calling up computer information
3 When the lights are on: instrument lighting
brightness 82
4 Calling up Check Control
5 Checking engine oil level
6 Initializing the Flat Tire Monitor
Resetting the Tire Pressure Monitor
7 Setting the time 68
8 Setting the date 68
9
Viewing service requirement display
10 Setting formats and units of measure,
resetting to factory settings
Online Edition for Part no. 01 41 2 602 097 - © 10/08 BMW AG
11 Adjusting settings
64
Exiting displays
The outside-temperature reading and the time
68 reappear when you press button 2 or if you
make no entries within approx. 15 seconds. If
*
136
required, complete the current setting first.
73
75

Formats and units of measure

You can set formats and units of measure.
66
65
>
Confirmation signals when locking and
unlocking the vehicle
> Response during unlocking
procedure 19
> Automatic locking
> Pathway lighting 80
> Daytime running lamps
> Triple turn signal activation
*
> Seat memory 38
20
22
81
52
65