Central Locking System - BMW 328i xDrive Owner's Manual

>
Settings for the display in the instrument
cluster:
>
12h/24h format of the clock, refer to
page 65
> Date format, refer to page
> Units of measure for fuel consumption,
distance covered/remaining distances,
and temperature, refer to page
> Light settings:
>
Pathway lighting, refer to page
> Daytime running lamps, refer to page
>
Automatic climate control
gram, cooling function and automatic recir-
culated-air control activated/deactivated,
setting temperature, air flow rate and distri-
bution, refer to page
>
Entertainment:
> Audio volume, refer to separate Owner's
Manual
> Speed-dependent volume control, refer
to separate Owner's Manual

Central locking system

The concept
The central locking system functions when the
driver's door is closed.
The system simultaneously engages and
releases the locks on the following:
> Doors
> Luggage compartment lid/tailgate
> Fuel filler door
Operating from outside
>
Via the remote control
*
> Via the door lock
>
In cars with convenient access
handles on the driver's and front passen-
ger's doors
In addition, if the remote control is used, the
interior lamps and the door's courtesy lamps
are also switched on or off. The alarm system
Online Edition for Part no. 01 41 2 602 097 - © 10/08 BMW AG
65
65
80
81
*
: AUTO pro-
87 ff
*
, via the
*
*
is also armed or disarmed.
For further details of the alarm system, refer to
page 26.
Operating from inside
By means of the button for central locking, refer
to page 22.
In the event of a sufficiently severe accident, the
central locking system unlocks automatically. In
addition, the hazard warning flashers and inte-
rior lamps come on.
Opening and closing:
Using the remote control
Persons or animals in a parked vehicle
could lock the doors from the inside. You
should therefore take the remote control with
you when you leave the vehicle so that the latter
can be opened from outside.<
Unlocking
Press the button.
The interior lamps, the courtesy lamps
welcome lamps come on.
Setting unlocking characteristics
You can set whether only the driver's door or
the entire vehicle is to be unlocked when the
button is pressed for the first time.
For operating principle, refer to page 65.
1. Switch on the ignition, refer to page 47.
2. Lightly push button 1 in the turn indicator
lever up or down repeatedly until the sym-
bol appears in the display accompanied by
the word "SET".
*
and the
19