BMW 328i xDrive Owner's Manual page 165

1 2
Indication in US models
Brake pads worn
Indication in Canadian models
Brake pads worn
Lights up in red:
> Starter failed or
> ignition malfunctioning. Engine
restart only possible when brake is
depressed or
>
lighting system failed. Low beams/
tail lamps and brake lamps still
operational. All other lamps failed
Lights up in yellow:
> Control of the brake lamps failed or
> fuel supply malfunctioning
Flashing:
Dynamic Stability Control DSC or
Dynamic Traction Control DTC is con-
trolling drive and braking forces, refer
also to page
Dynamic Traction Control DTC acti-
vated, refer also to page
Dynamic Stability Control DSC and
Dynamic Traction Control DTC deacti-
vated, refer also to page
Suspension control system failed, refer
also to page
xDrive has failed, refer also to page
Online Edition for Part no. 01 41 2 602 097 - © 10/08 BMW AG
Cause
72
72
72
71
73
What to do
Have the condition of the brake pads
checked without delay.
Have the condition of the brake pads
checked without delay.
Have the system in question checked
without delay.
The engine cannot be restarted.
Depress the brake to restart the engine.
You can continue your journey, but
moderate your speed and exercise due
caution. Have the system in question
checked without delay.
Driving stability limited during accelera-
tion and cornering.
Driving style must be readjusted.
Driving stability limited during accelera-
tion and cornering.
You can continue your journey, but
moderate your speed and exercise due
caution. Have the system checked as
soon as possible.
You can continue your journey. Drive
cautiously and think well ahead. Avoid
driving on rough tracks, full-throttle
operation and use of the transmission's
kick-down mode. Have the system
checked immediately.
163