Majestic 32VFHNVC Installation And Operating Instructions Manual page 16

FIREPLACE FRAMING
When finishing a custom cabinet, mantel, or other built-in enclosure,
the opening size to accommodate the fireplace with trim installed is
as follows:
32VFHNVC
32VFHPVC
K 37⅞"
J 35⅞"
1. Bend out the nailing flanges located on each side of the firebox.
2. Slide the firebox into prepared framing or position firebox in its final position and frame later.
3. Level the firebox by checking the top edge of the firebox. Shim if necessary.
4. Anchor firebox to the side framing members using 8d nails or other suitable fasteners. Refer to Figure 14.
5. The canopy must be installed for safe operation of the heater. Refer to page 12 for canopy installation details.
Nail Sides
Through Nailing
Flanges
1
36VFHNVC 42VFHNVC
36VFHPVC 42VFHPVC
41⅞"
35⅞"
The fireplace must be installed giving
full consideration to the clearance and
height requirements identified in this
manual.
Figure 14 - Location of Nailing Flanges
47⅞"
35⅞"
Figure 13 - Custom Cabinet
71D0533