When You Are Finished; Hard Floor Cleaning - Bissell PROheat All-Rounder User Manual

O
peration

When you are finished

1. Turn off the heater, wet clean, and power buttons.
2. Remove the collection tank from the unit by
opening the quick release hose holder and
lifting the tank straight up by the handle.
3. Remove the top lid from the collection tank
and set it aside.
4. Empty dirty water into a sink, toilet or outside.
Pour the dirty water out from the corner of the
tank. Rinse out the tank thoroughly.
5. Allow all parts to dry before storing.

Hard floor cleaning

1. See "Getting Ready to Wet Clean" on Page 10.
2. Be sure to use BISSELL 2X Hard Floor Solutions
in the solution tank for hard floor cleaning. Fill
the formula tank by first unscrewing the mea-
suring cap. Always use genuine BISSELL for-
mulas to maximize cleaning and for the safety
of your machine. Fill tank to fill line with hot tap
water. Add one full cap of formula. Screw mea-
suring cap tightly back onto the solution tank.
3. Set the solution tank back in the machine.
4. Attach microfiber pad to quick dry hard floor tool by
attaching to the Velcro strips on the top of the tool.
5. Attach the hard floor tool to end of the wand.
6. Place tool directly on the hard floor surface,
resting on the pad.
7. Squeeze the spray trigger to moisten the pad
with cleaning solution.
Caution: Do not oversaturate.
8. Move the tool back and forth across the floor
to clean. Squeeze spray trigger as needed.
9. Tilt the tool forward and pull back. This will
create the best suction and will help get the
hard floor surface as dry as possible.
10. Continue until room is complete.
11. See "When you are finished" instructions above.
12. Be sure to remove the microfiber pad and
clean it by hand or machine wash as needed.
Allow it to dry completely before next use.
12
w w w . b i s s e l l . c o m
2
4
CAUTION:
Your PROheat All-Rounder is
designed to clean hard floor-
ing such as ceramic tile, vinyl,
laminate, marble, stone and sealed
hard wood floors. Do not use on
any unsealed hard floor surfaces.
4
3