Messaging Waiting; Message Waiting - Single Lamp; Voice Message Waiting - NEC Univerge SV8300 User Manual

1.

Messaging Waiting

M W - S
ESSAGE AITING INGLE
This feature allows the administrative station to light a
lamp on a Single Line Telephone to indicate a message
is waiting.
V M W
OICE ESSAGE AITING
In addition to the lamp indication control, this feature
also provides a Voice Message Waiting service where
an originating station user can set the Message Waiting
with a recorded message by using the Voice Response
System (VRS).
Voice Message Waiting - System
An originating station user can choose the recorded
message to be set by dialing the message number
associated.
The messages are recorded by the predetermined
station.
L
AMP
Voice Message Waiting - Individual
When setting Message Waiting, an originating station
user announces the message to be recorded after
dialing the station number.
To set Message Waiting:
1. Lift the handset and receive dial tone.
2. Dial the Message Waiting set access code.
3. Dial the desired station number and receive
service set tone.
4. Restore the handset.
To cancel Message Waiting:
1. Lift the handset and receive dial tone.
2. Dial Message Waiting reset access code.
3. Dial the desired station number and receive
service set tone.
4. Restore the handset.
30