Holding Calls; Exclusive Hold; Transferring Calls; 3/4 Party Conference - NEC Univerge SV8300 User Manual

1.

Holding Calls

E H
XCLUSIVE OLD
With a call in progress:
Press Hookswitch.
Replacing the handset when a call is on hold will
Note 1:
cause the held call to immediately ring your
station.
Once a call is placed on hold, the telephone can be
Note 2:
used to place another internal or outside call or
access a feature (i.e, Call Pickup). Replace
handset to return to the original party.

Transferring Calls

With a call in progress:
1. Press Hookswitch.
2. Dial station number.
3. Announce call (optional).
4. Replace handset.
Note 1: If the called station is busy, replacing handset will
initiate a camp-on. An unanswered camp-on or
ring transferred call will recall to your telephone
after a preprogrammed time interval.
Note 2: To return to the original party, press Hookswitch
twice.
Note 3: To transfer a call directly to a personal voice
mailbox, dial 2 after dialing the station number.

3/4 Party Conference

With an internal call in progress:
1. Press Hookswitch.
2. Place second call (internal or outside).
3. Announce conference.
4. Press Hookswitch to establish conference.
Note 1: Repeat above procedure to add a fourth party.
No more than 1 outside party can participate in a
Note 2:
conference.
A conference may be placed on Hold by pressing
Note 3:
Hookswitch. Replacing the handset will cause the
conference call to ring your telephone.
5