Set Relocation; Station Speed Dialing; Step Call - NEC Univerge SV8300 User Manual

1.
To cancel Pad Lock:
1. Lift the handset and receive dial tone.
2. Dial the access code for Station Authorization
Code and receive Service Set Tone, if
programmed.
3. Enter Station Authorization Code.
4. If the code is right, Dial Tone will be heard. (If the
code is not right, Reorder Tone will be heard.)
5. Dial access code to reset Room Cutoff.
6. Service Set Tone will be heard.
7. Restore handset.

Set Relocation

This feature enables two stations to be moved from one
location to another without programming station data.
To move Station A to Station B:
1. Lift handset at Station A. Receive Dial Tone.
2. Dial Authorization Code access code. Receive
Special Dial Tone.
3. Dial Authorization Code for changing station class
temporarily. Receive Dial Tone.
4. Dial Set Relocation access code. Receive Special
Dial Tone.
5. Dial Station B number; receive Service Set Tone.
6. Restore the handset. After four seconds, data
between Station A and Station B will be
exchanged.

Station Speed Dialing

This feature allows a station user to dial
frequently-called numbers by dialing an access code
and an abbreviated code.
1. Go off-hook and dial the Station Speed Dialing
feature access code.
2. Dial the abbreviated code assigned to the desired
number.
3. The number is dialed.
To program numbers in memory:
1. Go off-hook and dial the Station Speed Dialing
programming code.
2. Dial the abbreviated code to be assigned.
3. Dial the trunk access code and the desired
telephone number.
4. Restore the handset.

Step Call

This feature allows the station user, after calling a busy
station, to call an idle station by simply dialing an
additional digit. This feature will operate only if the
number of the idle station is identical to that of the busy
station in all respects, except the last digit.
1. The dialed station (for example, Station 220) is
busy.
2. Dial 5.
3. If Station 225 is idle, the call will be connected
there.
25