Panasonic KX-TG7841 Operating Instructions Manual page 100

Link to cell
You can use the unit to make or answer calls using a cellular line. Your cellular phones must have
Bluetooth® wireless technology that is compatible with this product. For more details, please visit
our Web site: http://www.panasonic.com/link2cell
• Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit
during a cellular call, you may hear noise. For best performance, we recommend placing the
cellular phone between 0.6 m to 3m (2 feet to 10 feet) away from the base unit.
1
Handset:
For CELL 1: [MENU][!][§][2][!][1]
For CELL 2: [MENU][!][§][2][!][2]
Ill ~
0
Bluetooth®
(< >)
¢==::=:::>
Cell line
Cell phone
service providers
• After the CELL 1 or CELL 2 indicator on the base unit starts flashing, the rest of the
procedure must be completed within 5 minutes.
2
Your cellular phone:
While the CELL 1 or CELL 2 indicator is flashing, follow the instructions of your cellular phone
to enter the pairing mode.
• Depending on your cellular phone, it may ask you to enter the base unit PIN (default:
"0000").
3
Handset:
Wait until a long beep sounds.
• It may take more than 10 seconds to complete pairing.
• When the CELL 1 or CELL 2 indicator lights up, the cellular phone is connected to the base
unit. You are ready to make cellular calls.
4
[OFF]
Note:
• Make sure that your cellular phone is set to connect to this product automatically. Refer to your
cellular phone's operating instructions.
Trademarks
• The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such
marks by Panasonic Corporation is under license. All other trademarks identified herein are
the property of their respective owners.
-4-