IBM THINKCENTRE 8086 User Manual page 42

1. Start the IBM Setup Utility program (see "Starting the IBM Setup Utility
2. Select Startup.
3. Select Startup Sequence. See the information displayed on the right side of the
4. Select the sequence of devices for the Primary Startup Sequence, the Automatic
5. Select Exit from the IBM Setup Utility menu and then Save Settings.
If you have changed these settings and want to return to the default settings, select
Load Default Settings on the Exit menu.
28
User Guide
program" on page 25).
screen.
Startup Sequence, and the Error Startup Sequence.