Keyboard Commands; Setting The Camera Address - Bosch VEZ Series Installation Manual

AutoDome Easy II
10.2.2

Keyboard Commands

Keyboard control commands are composed of a sequence of
three (3) inputs with the following convention: 1) a Function
key + 2) a Command number key(s) + 3) the Enter key.
–
NOTICE!
The convention used for control key commands in this manual
is ON, OFF, SET, and SHOT. Refer to your keyboard manual for
the key naming conventions.
–
–
For example, the keyboard command to make the AutoDome
Easy II pan 360º continuously is:
ON-1-ENTER (press the ON key, then press the number 1 key,
and then press ENTER). To stop the camera from panning,
move the joystick in any direction.
10.3

Setting the Camera Address

Once the AutoDome Easy II power is turned on and homing is
complete, you must set the camera address. You may also want
to customize some of the AutoDome Easy II default settings.
NOTICE!
You do not need to set a camera address if using Bilinx.
Bosch Security Systems, Inc.
Depending on the type of keyboard, the control function
keys are labeled:
ON or AUX ON
OFF or AUX OFF
SET or SET SHOT
SHOT or SHOW SHOT
Command numbers range from 1 to 999. See Keyboard
Commands by Number for a complete list of keyboard
commands.
The Enter key can also be labeled with the 8 symbol.
Installation Manual
Getting Started | en
F.01U.164.478 | 2.0 | 2010.02
77