IBM MICRO TOWER 2169 Hardware Maintenance Manual page 2

Note
Before using this information and the product it supports,
be sure to read the general information under "Notices"
on page 1.
First Edition (July 2000)
The following paragraph does not apply to any state or country
where such provisions are inconsistent with local law:
INTERNATIONAL BUSINESS MACHINES CORPORATION
PROVIDES THIS PUBLICATION "AS IS" WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESSED OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. References to IBM products,
programs, or services do not imply that IBM intends to make
them available outside the United States. This publication
could include technical inaccuracies or typographical errors.
Changes are periodically made to the information herein; these
changes will be made in later editions. IBM may make
improvements and/or changes in the product(s) and/or the
program(s) at any time. Address comments about this
publication to IBM Corporation, Dept. E23/962-2, 455 Park
Place, Lexington, KY 40511-1856, USA. Information you
supply may be used by IBM without obligation. For copies of
publications related to this product, call toll free 1-800-IBM-7282
in the Continental U.S.A. In Canada, call toll free 1-800-465-
7999.
© Copyright International Business Machines Corporation
2000.
All rights reserved.
Note to U.S. Government Users – Documentation related to
restricted rights – Use, duplication or disclosure is subject to
restrictions set forth in GSA ADP Schedule Contract with IBM
Corp.
ii