Chevrolet 2013 Equinox Owner's Manual page 94

3-44 Seats and Restraints
1.2. Put the child restraint on
the seat.
1.3. Attach and tighten the lower
attachments on the child
restraint to the lower
anchors.
2. If the child restraint manufacturer
recommends that the top tether
be attached, attach and tighten
the top tether to the top tether
anchor, if equipped. Refer to the
child restraint instructions and
the following steps:
2.1. Find the top tether anchor.
2.2. Route, attach and tighten
the top tether according to
your child restraint
instructions and the
following instructions:
If the position being used
does not have a headrest
or head restraint and a
single tether is being used,
route the tether over the
seatback.
I n f o r ma t i o n P r o v i d e d b y :
If the position being used
does not have a headrest
or head restraint and a dual
tether is being used, route
the tether over the
seatback.