Menu Structure - Sony Trinitron BVM-A14F5U Operation Manual

Menu Structure

The main menu and Level 1 are shown below.
Detailed information on the menu levels is described at the
top of each menu explanation.
Main menu
PICTURE ADJ [A]
COLOR TEMP ADJ [B]
INPUT CONFIGURATION [C]
26
Menu Structure
Level 1
PRESET VALUE
AUTO [A1]
MANUAL ADJUST [A2]
COPY FROM [A3]
PRESET VALUE
MANUAL [B1]
AUTO [B2]
COPY FROM [B3]
RESTORE FACTORY DATA [B4] Resets the color temperature. (page 33)
ANALYZE [B5]
CHxx
FORMAT [C1]
SLOT NO
INPUT NO
SCREEN ASPECT
SCAN SIZE
SYNC MODE
COLOR TEMP
PICTURE PRESET
MATIRIX [C2]
APERTURE
VALUE
YC SEP
NTSC COMB FILTER
MARKER DISPLAY
MODE [C3]
H PHASE
CHANNEL NAME [C4]
COPY FROM [C5]
Functions
Adjusts the picture. (page 28)
Selects the preset data to be adjusted. (page 28)
Sets the chroma/phase/matrix automatically. (page 29)
Sets the preset values for the phase/chroma/brightness/contrast
with the MANUAL adjustment knob. (page 29)
Copies the other picture preset data. (page 30)
(available in software version 1.10 or higher)
Adjusts the color temperature. (page 30)
Selects the color temperature data to be adjusted. (page 31)
Sets the color temperature with the MANUAL knob. (page 31)
Sets the color temperature automatically. (page 32)
Copies the other color temperature. (page 33)
(available in software version 1.10 or higher)
Reads the color temperature and luminance value. (page 33)
Sets the data for the input signals. (page 34)
Current channel is indicated.(page 35)
Selects the signal format. (page 36)
Selects the slot number. (page 35)
Selects the input connector number. (page 35)
Sets the aspect ratio. (page 35)
Sets the scan size. (page 35)
Sets the sync signal. (page 35)
Selects the color temperature. (page 35)
Selects the picture adjustment preset. (page 36)
Sets the matrix of the signal system. (page 37)
Chooses whether to use aperture adjustment or not. (page 36)
Enters the aperture adjustment value. (page 36)
Selects Y/C separation filter. (page 36)
Sets the NTSC COMB ilter. (page 36)
Chooses whether or not to display the marker. (page 36)
Sets the marker aspect, safe area, safe title, etc. (page 37)
Adjusts the horizontal picture position. (page 36)
Sets the channel name. (page 38)
Copies the data from other channel. (page 39)
(available in software version 1.10 or higher)