Structure Of The System Configuration Menu; Setting Lists In The System Configuration Menu - Sony Trinitron BVM-A14F5U Operation Manual

Structure of the SYSTEM
CONFIGURATION Menu
Level 1 Level 2
NETWORK... [D1] MONITOR ID
GROUP ID
NETWORK
SETTINGS... [D11]
PARALLEL PARALLEL
REMOTE... [D2] REMOTE
1 PIN... - 8 PIN...
[D21]
POWER... [D3] STANDBY MODE
POWER ON
STATUS
DEFAULT CH
DEGAUSS DELAY
BLANKING ANCILLARY DATA
SETTINGS... [D4]
VITS BLK
ON SCREEN SET... FORMAT DISPLAY
[D5]
POSITION
CH NO
POSITION
CH NAME
POSITION
PASSWORD... [D6]
CHANGE
PASSWORD... [D61]
APPLY
PASSWORD... [D62]
MAINTENANCE... [D7]
40
[D] System Configuration – SYSTEM CONFIGURATION Menu
Setting Lists in the SYSTEM
CONFIGURATION Menu
This section explains the setting lists displayed in the
Level 3
menu.
How to read the settin lists
• For purposes of explanation, each setting list is preceded
by a menu number. These numbers are not displayed on
the screen.
For more information on the menu number, see "About
PARALLEL
menu numbers" on page 23.
REMOTE [D211]
• The arrow mark (k) refers you to another setting list
that appears after you make the setting, or to an operation
that is to be carried out as a result of the setting.
[D] SYSTEM CONFIGURATION Menu
NETWORK...: Set the remote control function of the
PARALLEL REMOTE...: Set the parallel remote
POWER...: Set the condition of the monitor when the
BLANKING SETTINGS...: Adjust the data for the
ON SCREEN SET...: Set the data for the screen
CHANGE
PASSWORD [D611]
PASSWORD...: Set the passwords for the menu.
APPLY PASSWORD
[D621]
MAINTENANCE...: Display the menu for
[D1] NETWORK... menu
MONITOR ID: Enter a monitor ID No..
GROUP ID: Enter a group ID No..
NETWORK SETTINGS...: Set the IP address,
network. k[D1]
control function. k[D2]
main power is turned on or the power is turned on
by remote operation. k[D3]
blanking. k[D4]
display. k[D5]
k[D6]
maintenance. k[D7]
Set to 01 to 99 (default setting is 01).
Set to 01 to 99 (default setting is 01).
subnet mask and default gateway. k[D11]