System Configuration Menu - Sony LMD-2735MD Manual

Control Lock
Control Lock Set when you want to limit the
operation of the control panel. Set to
"Off' for no limit, "On" to limit.
Lock Mode Sets the range to limit the operation of
the control panel. This setting is
available when "Control Lock" is set to
• Menu: Limits the menu operations
other than the control lock setting.
• Menu&Button: Limits all operations
other than the control lock setting.
OSD Setting
Menu Position Sets the screen position for the OSD
menu.
Set the position of the OSD menu with
the "Upper Left, " "Upper Right;' "Lower
Right;' "Lower Left, " and "Center"
icons.
Status Display Port, Flip Pattern, input connector
name, signal format, PIP/POP mode,
and control lock are displayed.
0

System Configuration menu

0
System Conßguration
jeontro11.oc1<
Submenu Setting
Select Port Input Terminal
Flip Pattern PIP/POP mode display
Operation lock display
• Auto: The format and scan mode are
displayed for about 3 seconds when
the content of Status Display is
changed.
On: The format and scan mode are
always displayed.
• Off: The format and scan mode are
not displayed.
• Even if the setting is set to "Auto" or
"Off,' the flip pattern is available.
• For details about the signal format,
refer to no signal and incompatible
signal displays.
No signal
Non compatible
signal ( except for
DVI-D)
Non compatible
signal (DVI-D)
Language You can select the menu or message
language from the following languages.
• English: English
• i:j:,Jt: Chinese
• 8 :;jl:Zft: Japanese
• Italiano: Italian
• Espaiiol: Spanish
• Deutsch: German
• Franc;ais: French
• PyccKIDJ: Russian
Power On Setting
Power On Mode Selects the setting when the monitor is
turned on from the following settings.
• Last: The setting when the monitor
was last turned off.
• Default Setting: The setting that is
set in the default setting.
• Userl to 20: The selected user
setting.
Logo Select the logo when the power turns on
from among "On - Ssec, " "On - lOsec;'
"On - 30sec;' "On - 60sec, " "On -
120sec, " "Off."
Power Save
Energy Saving Selects the energy saving mode.
Mode • Off: Turns the energy saving mode
off.
• On: Dims the backlight.
Submenu Setting
•@Mi
CID
Input
No Sync
Unknown
Out OfRange
Signal format
display
127
Adjustment Using the Menus