Viper 5606V Owner's Manual page 62

Programming System Features
The System Features Learn Routine dictates how the unit operates. It is possible to
access and change most of the feature settings using the Control button.
1. Open a door.
2. Turn the ignition on, then off.
3. Select a Menu. Press and hold the Control button. The number of siren chirps
indicates the menu number. 1 chirp indicates menu 1, 2 chirps - menu 2 and
3 chirps for menu 3.
When the desired menu chirps are heard, release the Control button.
4.
Select a Feature. Press and release the Control button the number of times
5.
corresponding to the feature you wish to change. Then press and hold one
more time to select the features.
6. Program the Feature. While holding the Control button, you can program the
feature using the remote control.
For features with only two options; = option 1 while = option 2.
For features with more than two options; selects the options in ascending order,
while selects them in descending order.
Note: Pressing button resets the feature to the factory default.
Once a feature is programmed:
• Other features can be programmed within the same menu
• Another menu can be selected
• The learn routine can be exited if programming is complete
To access another feature in the same menu:
1. Press and release the Control button the number of times necessary to advance
from the feature you just programmed to the next one you want to program.
2. Then press the Control button once more and hold it.
To select another menu:
Press and hold the Control button.
1.
2. After 3 seconds, the unit advances to the next menu and the siren chirps, indi-
cating which menu has been accessed.
The learn routine exits if any of the following occurs:
• The open door is closed
• The ignition is turned On
• There is no activity for 30 seconds
• The Control button is pressed too many times
Feature Menus
Default settings are in bold type.
Menu 1 - Security
Menu Feature Opt. 1 Opt. 2 Opt. 3 Opt.4
Item
1 System Arming Mode Active Passive Arm Passive Auto re-arm
w/o lock Arm w/ w/o lock
lock
2 Panic Mode On Ign Off Off
only
3 Confirmation Chirps On w/Warn On w/ Off w/ Off w/
chirps On Warn Warn warn
chirps Off chirps On chirps Off
30 sec.
4 Siren Duration 60 sec.
5 Ign-controlled Locks No Ign- Lock & Lock Only Unlock
Unlock Only
locking
6 Door Lock Pulses Single Double Double Double
Unlock Lock Only Lock &
Only Unlock
7 Door Lock Output 0.8 sec. 3.5 sec. 0.4 sec.
Duration
8 2nd Unlock 2nd unlock 2nd unlock
on Ign- on Ign-
control after control with
first unlock first unlock
© 2013 Directed. All rights Reserved.
9 Comfort Closure No Comfort Comfort Comfort
Closure 1 Closure 2
Closure
10 Horn Function Full Alarm Siren Func- Siren Func-
Only tion 20 ms tion 30 ms
11 Hood Switch type Normally Normally
Open
closed
12 Sensor Full trigger Single Double
13 Door Switch Type Normally Normally
open closed
14 Trunk Switch Type Normally Normally
open closed
15 Remote Button unlock On Off
(Ign off)*
* Not available with the 1-way remote control.
Menu 2 - Convenience
Menu Feature Opt. 1 Opt. 2 Opt. 3
Item
1 One-time Bypass One time One time
bypass bypass On
Off
2 Nuisance Prevention On Off
3 Override Pulse count 1 2 3
4 Door Trigger Error On Off
Chirp
5 Ign-controlled Dome On Off
light
6 OEM Alarm Disarm On Off
w/Aux-Trunk
7 OEM Alarm Disarm With Before Remote
Output Unlock Unlock Start Only
8 OEM Alarm Disarm 1 2
Pulses
9 Aux 1 Output type Validity Latch Latch/
reset/ign
10 Aux 1 Linking No Linking Link to Arm Link to
Disarm
11 Aux 2 Output Type Validity Latch Latch
reset/ign
12 Aux 2 Linking No Linking Link to Arm Link to
Disarm
13 Aux 3 Output Type Validity Latch Latch
reset/ign
14 Aux 3 Linking No Linking Link to Arm Link to
Disarm
Opt. 5+
15 Aux 4 Output Type Validity Latch Latch
Auto
re-arm w/ reset/ign
lock
16 Aux 4 Linking No linking Link to Arm Link to
Disarm
17 Aux/Trunk Output type Validity Off 2nd unlock
Menu 3 - Remote start
Menu Feature Opt. 1 Opt. 2 Opt. 3
Item
1 Transmission Mode Manual Automatic
2 Engine Checking Mode Virtual Voltage Off
Tach
3 Cranking Time 0.6 sec. 0.8 sec. 1.0 sec.
4 Remote Start Runtime 12 min. 24 min.
1
5 Activation Pulse Count 2
Siren Siren Func-
6 Turbo Mode No Turbo On-1 min.
Function tion 50 ms
Mode
40 ms
7 Timer Mode Runtime 12 min. 3 min.
8 Flex Relay Function Ignition 2 Acces-
sory 2
Wait-to
9 Diesel Start Delay Timed 15
Start input sec.
10 Accessory during Diesel On Off
Start Delay
11 Status 2 Output Status Latch Rear
Defogger
Constant
12 Parking Light Output Pulsed
13 Anti-grind Output On Off
14 Tach Mode Starter Normal Increase
Release
Opt.4 Opt. 5+
15 Vehicle Temp Off On
Auto Report*
16 Remote Start Safelock Off On
* Not available with the 1-way remote control.
4 5
Reset and Delete
To reset the features/virtual tach or delete remote controls follow this procedure:
1. Open at least one vehicle door
2. Turn the key to the ON position
3. Within 5 seconds press and release the control button: 2 times to delete re-
motes, 3 times to reset the features to default or 4 times to reset virtual tach.
4. Once you have selected the function step, press the control button once more
and hold it. The LED will flash and the siren will chirp to confirm the functional
step chosen. Release the control button.
5. Press the button of a programmed remote control. The siren will chirp con-
firming the feature has been reset/deleted.
30 sec. Off (5)/2nd
Timed unlock (6) Note
: Deleting a remote control does not reset the features or virtual tach, resetting
Link to Link to the features does not delete remote controls or reset virtual tach. The Zap feature on
Arm/ Remote Start
the Bitwriter will not reset the virtual tach setting.
disarm only
30 sec. Off (5)/2nd
Reset/delete will exit if:
Timed unlock (6)
• The ignition is turned off
Link to Link to
• The open door is closed
Arm/ Remote Start
Disarm only • 60 seconds lapses with no actions.
30 sec. Off (5)/2nd
Timed unlock (6)
Remote Pairing
Link to Smart Key
Arm/ Control (Link
Prepare the vehicle system to be Paired with a new remote
Disarm to Remote
Start Off) 1. Open at least one vehicle door.
2. Turn the key to the ON position.
30 sec. Off (5)/2nd
3. Within 5 seconds press and release the Control button on the Control Center
Timed Unlock (6)
one time.
Link to Link to
Within 5 seconds, press and hold the Control button on the Control Center.
Arm/ Remote Start 4.
Disarm Only
The status LED begins flashing in single flash sequence and the siren chirps
once to confirm the system is ready for remote pairing. Release the button.
5. Locate your remote control model below and follow the instructions.
System Pairing will exit if:
• The ignition is turned off
Opt.4 Opt. 5+
• The open door is closed
• 60 seconds lapses with no actions
Tachom-
Note
: Make sure the remote to be paired with the system is set for the desired Car
eter
1 or Car 2 operation.
1.2 sec. 1.4 (5)/ 1.6
(6)/ 1.8 (7)
HD Remote Control:
2.0 (8)/
4.0 (9)
1. With the HD remote screen blank, press in and hold the menu wheel (located
on the side) for 3 seconds until the
2. Toggle the menu wheel until the Adjustments
60 min.
3. Press in on the menu wheel to enter.
4. In the Adjustments menu highlight Remote Pair and press in the menu
wheel to go to the screen. Follow the on-screen instructions:
On-3 min. On-5 min. On- 10 min.
i. Press and hold the
ii. The siren chirps to indicate the system has learned the remote ID and is
6 min. 9 min.
sending its ID to the remote
Starter 2
iii. Release the
5. Successful or failed pair: The HD remote control indicates a successful or failed
Timed 30 Timed 45
pairing and returns to the
sec. sec.
go back to the
another pairing.
Pulse Rear
To exit pairing mode on the remote:
Defogger
• Press and release the
Off
• Wait 30 seconds without pressing a command button on the remote.
LCD Remote Control:
Decrease
1. Press and hold the
Main Menu is displayed. Release the
Press the AUX or
2.
3. Press and hold the
button. The remote is now ready to pair with the system.
4. Press the button.
5. Wait several seconds for feedback as the remote generates a security encryp-
tion and sends it to the Control Center. If pairing is successful the siren chirps
and the remote emits several tones. The screen displays if the Pairing is success-
ful or failed with corresponding text. If pairing fails repeat step 4.
To exit pairing mode on the remote:
• Press and release the
• Wait 30 seconds without pressing a command button on the remote.
Responder LED or Companion Remote Control:
1. Press and hold the
solid. Release the
2. Press and hold the
solid.
3. Press the button.
4. Wait several seconds for feedback as the remote generates a security encryp-
tion and sends it to the Control Center. If pairing is successful the siren will chirp
and the 2-way remote will emit several tones (the companion remote does not
generate tones). If pairing is not successful press and release the
once and then repeat steps 2 and 3.
To exit pairing mode on the remote:
• Press and release the
LED shuts off.
• Wait 30 seconds without pressing a command button on the remote control.
Basic Remote Functions
DIRECT
Level
ACCESS
Button
ARM
DISARM
REMOTE START
TRUNK RELEASE
A U X
FUNCTION SHIFT
Note: See Owner's guide for your specific model for more details. The above table
is applicable to LCD, LED and Companion remote controls only, but not HD.
Settings screen appears.
screen appears.
button until tones are played.
button.
Adjustments menu. If pairing fails, the remote will
Remote Pair screen, press the button again to attempt
button.
button for 8 seconds, the remote beeps once,
button.
buttons until Pair is displayed.
button until the remote beeps 3 times then release the
button.
button for 8 seconds. The transmit LED will come on
button.
until the transmit LED flashes 3 times then comes on
button
button once, then press and hold until the transmit
X 1 X 2 X 3 X 4
SILENT ARM SENSOR BYPASS ARMED (SILENT ARMED (SILENT
SENSOR) TRIGGER)
SILENT DISARM VALET MODE CAR FINDER
RUNTIME RESET TIMER MODE SMART START REAR DEFOGGER
AUX 1 AUX 2 AUX 3 AUX 4
CABIN TEMPERA- RUNTIME CHECK LAST TRIGGER
TURE REQUEST (2-WAY ONLY) REQUEST
(2-WAY ONLY) (2-WAY ONLY)
QRN5X06 2013-08
2