Specifications; Typical Frequency Response - Shure WH20 User Manual

3. Rinse the windscreen in clean water and dry it with a clean cloth or paper towel.
Allow it to air-dry thoroughly.
4. When the windscreen is dry, slide it over the WH20 microphone.
WASHING THE ELASTIC HEADBAND
The elastic headband can be removed from the wireframe and hand-washed in a
mild soapy water solution. To remove and wash the headband, follow these steps:
1. Remove the microphone cable retainer from the wireframe.
2. Slide the elastic headband off the wireframe.
3. Wash the headband and allow to dry thoroughly.
4. Slide the headband around the wireframe to its original position. Reattach the
cable with the plastic retainer.
Note that the elastic headband supplied with the WH20 is not a standard size;
headbands purchased in stores are too long for this application.

SPECIFICATIONS

Type
Dynamic, Close-Talking
Frequency Response (at 8 mm)
50 to 15,000 Hz (see Figure 6)
+10
0
–10
20 50 100 200 500

TYPICAL FREQUENCY RESPONSE

FIGURE 6
1,000 2,000 5,000 10,000 20,000
Hz
5