Edimax Wireless Multi-Homing Broadband Router User Manual page 48

Parameters
Mode
ESSID
Channel Number
Associated Clients
MAC address
Default
default
11
48
Description
It allows to set the AP to AP or WDS mode.
This is the name of the wireless LAN. All the
devices in the same wireless LAN should have
the same ESSID.
The channel used by the wireless LAN. All
devices in the same wireless LAN should
use the same channel.
Click "Show Active Clients" button, then an
"Active Wireless Client Table" will pop up. You
can see the status of all active wireless stations
that are connecting to the access point.
If you want to bridge more than one networks
together with wireless LAN, you have to set this
access point to "AP Bridge-Point to Point mode",
"AP Bridge-Point to Multi-Point mode" or "AP
Bridge-WDS mode". You have to enter the MAC
addresses of other access points that join the
bridging work.