Surface Controls Cooking; Pf" "Hs" Message; Locations Of The Radiant Surface Elements And Controls - LG LSB5682SS Owner's Manual & Cooking Manual

PF MESSAGE
The PF message will appear whenever there has been a
power interruption to the appliance. To clear the PF message
press ON/OFF control pad to reset and be sure to reset the
clock with the correct time of day.
H S ( Hot Surface) MESSAGE
LIGHT WILL:
• Come on when the unit is hot to touch after it is turned off.
• Come on during Self Cleaning Cycle.
• Stay on even after the unit is turned off.
• Glow until the unit has cooled down to approximately.

SURFACE CONTROLS COOKING

LOCATIONS OF THE RADIANT
SURFACE ELEMENTS AND
CONTROLS
The radiant surface elements are located on the cooktop as
below.
The radiant control key locations are same with radiant
surface elements on the cooktop.
single
Left Rear element
single
Left Front element
- 9 -
single
Right Rear element
Warming zone
Dual
Right Front
Dual element