Flymo SCIROCCO 2200 Original Instructions Manual page 5

G
J
M1
H1
1
K
M2
H2
L
x 5-6
Attaching the Shoulder Harness
1. Attach the Shoulder Harness to the product as
illustrated in Fig H1 or H2.
2. Adjust the Shoulder Harness as required to en-
sure it is in the most comfortable position and the
collection tube is positioned slightly above the de-
bris. (J).
Securing the Access Screw
1, Remove the label from over the Access Screw (K).
2. Turn the Access Screw 5-6 times clockwise (L)
until tight (do not overtighten)
• Important:- Your product will not operate if
the Access Screw is not tightened.
Cable Restraint
1. Form loop in mains cable and push the loop
through the slot (M1).
2. To secure, position loop over the hook and
pull the cable back through the slot (M2).